How To Operate A Gear Cycle

Bicycles with gears make the ride easier, whether going on Mountain or peddling on city streets. How to operate a gear cycle makes it easier to manage the geared bicycle. Understanding the basics of using the gears of the bicycle can make the ride easier. These are a few tips on how to run a gear cycle.


Online Bicycle Store in Pune and PCMC


 How do you identify Gears for a bicycle?

You can quickly identify if your bicycle has gears or without gears. If it does have gears, then what percentage of gears does it have?


 Count the number of gears in the front wheel.

If your bicycle has gears, it is easy to count how many. You’ll check at the center of the pedal and measure the steel ring with teeth on the surface that fit into the chain. These are front gears. Most bicycles will have between one and three front gears.


 Count the number of gears in the Rear wheel.

You can check at the backside. You want to see the chain run from the front gears over a unique set of rings at the center of the wheel. These are the rear gears. There are usually more rear gears than front gears. Some bicycles have seven or more gears.


 How many gears does your bicycle have?

You can multiply the number of front gears by the number of rear gears. You’ll also call it Speed. i.e. 7 Speed, 21 Speed Bicycle. For example, if you’ve three gears in the front and six in the rear, your bike has 3 × 6 = 18 gears. If you’ve one gear within the front and seven gears within the rear, your bike has 1 × 7 = 7 gears.


 Shifting Gears:


Use left to shift front gears.

Bikes with gears nearly always have hand controls on the handlebars for shifting. There are a few mechanisms for shifting gears that are common on bicycles.

These include:

  • Grip shifter that you work by turning your wrist
  • Small levers above or below the handlebars that you work alongside your thumbs
  • More significant levers next to the handbrakes that you work alongside your fingertips


 Use the right hand to shift the Rear Gears.

Using the right-hand controls will move the rear derailleur up and down. The rear gears nearly always use the exact mechanism as the front gears.

  • Grip shifters that you just work by turning your wrist
  • Small levers above or below the handlebars that you work alongside your thumbs
  • Larger levers next to the handbrakes that you work alongside your fingertips


 Gear down, which makes pedaling easier.

Shifting gears to lower makes riding more accessible, requiring less power to pedal. If we get the gears to slip, pedaling becomes much more accessible.


 Gear up for pedaling harder and more powerful.

Shifting gears to the highest makes pedaling harder, much faster, and more powerful. These gears make it harder to pedal, but each pedal pushes you further and causes you to travel faster.


 When to Shift Gears?

  • Gradually, it would be best to change gears once you increase speed. If you wish to increase the speed, you’d want to vary the gears as you’ll find that the lower gears start to feel “too easy” after a brief time. Usually, the middle gear will work well once you’re roaming on City roads. You’ll be ready to keep gear from the front, third, fourth, or Fifth from the rear. It should offer you an honest result.
  • You should pick lower gear once you begin your ride. Whenever you start riding, shift right down to a reasonably first to make it quicker and easier to urge copy to hurry. If you recognize you’re getting to prevent riding soon, it’s a good idea to shift into coffee gear so you’ll start easier next time.
  • Shift the gears down, moving on hills. This is often an important skill to seek out. You’ll be stuck walking your bike up more significant hills without it. It’s almost impossible to urge up a mountain high. However, lower gears allow you to pump your high Capitol Hill slowly and steadily without excessive additional effort.
  • Shift the gears up once you’re moving downhill and on flat ground. Being during a high is one of the few ways to speed up while going downhill. Lower gears won’t turn the chain quick enough to remain up with the wheels when you’re rolling downhill, making it impossible to hurry except Capitol Hill itself.


  • Practice on flat areas; honestly, because you’ll be hands-on, shifting gears is practicing on the flat area. Try front and rear gears by shifting the gears. Try using one of the hand controls to go up or down.
  • Change Gears only when you’re moving forward.



  • Don’t use the most critical front gear with the more giant rear gears.
  • Don’t use the littlest front gear with the smaller rear gears.
  • Avoid reversing pedals.


These are a few tips and tricks for beginners on How to Operate a Gear Cycle. Always confirm you’re accustomed to cycling safety tips before riding a bicycle, and wear a helmet to reduce the prospect of significant injury.


Sanrocycles Contact Us page


Sanrocycles Bicycle on Rent Details:

If you want to Rent a bicycle, Sanrocycles provides bicycles in Pune and PCMC. Bicycle on Rent is also available in Wakad, Hinjewadi, Aundh, Kharadi, and many more places. Found yourself with a spare hour? Grab a Bicycle and explore. It is okay if you have a cycle; if not, do not worry. You can hire a Bicycle rental in Pune or Pimpri-Chinchwad areas and start cycling. You can also book a bicycle online and rent a bicycle. There is also an online bicycle store from which you can book a reasonably priced bicycle.

Why buy a new bike when you can rent one? Bicycles can also be provided for all types of bicycle events/rallies. Rent starts from 1200 Rs per Month for a geared bicycle. Cycles on Rent in Pune and Pimpri Chinchwad are available every Month. Accessories such as a helmet and wire lock can be provided with a bicycle. Hire the best bicycles in 2 simple steps: