Most people love a bicycle that runs smoothly from the day it was purchased. Without any noise of brakes, smooth working gears, and easy to pedal, everyone loves and enjoys the bicycle ride. Slow changing gears and brakes that don’t bring the Bicycle to a quick stop, everyone recognizes the symptoms and needs attention after a long ride, how to service your Bicycle at home with a quick, easy fix and ride your Bicycle smoothly. Below are a few points that cover how to service your Bicycle at home with quick and easy steps.
Tools Needed:
Below are the tools needed to service or check a bicycle at home. These are the essential tools necessary to service your Bicycle.
- Allen Keys
- Clean Clothes
- Water
- Brushes
- Degreaser
- Chain lubricant
What to Check while Servicing the Bicycle
What should be checked if you want to service your bicycle at home? The points below cover the checklist you should follow while servicing the bicycle. These are the essential checklists for bicycle service at home.
- Cracks
- Dirt
- Damage of components
- Tire Wear
- Damage nuts and Bolts
- Brake cable
- Brake pads
- The front and rear lights are working
The period to service your Bicycle
Regular servicing is necessary to ensure the Bicycle runs smoothly and its components are not damaged. The frequency of servicing depends on the distance you ride; the more you ride, the more frequently you should service the Bicycle. You should clean the Bicycle if it is dirty. During the rainy season, wash your Bicycle often and check for chain lubricants. Even if the Bicycle is unused frequently, you should clean it, use lubricants, and check the brakes.
Check Wheels while servicing the Bicycle at home.
Check with the spoke to ensure they are correctly tensioned and replaced anywhere. It should spin freely without any side-to-side movement. Check with the quick release is tight and in good working condition. Inspect the bearing for any damage and clean it by wiping down the dirt. Avoid greasing or spraying them with any cleaners, as they are sealed units, which will wash out any lubrication within the casing. Mainly, this may be the job for the experienced one. You can check, and if you find any issues, you can visit nearby repair shops to prevent the damage.
Tighten all the screws, the critical part to check the Bicycle at home
Tighten all the screws which are on the Bicycle. Check if any nut bolts are damaged or need to be tightened. Make sure to check all the essential vital bolts to check.
Brakes and cables
Brakes are vital; ensure brakes are well maintained and check with cables. You can lift and spin the tire and check by applying the brakes. It should work perfectly. Check with the wear and tear for brake pads. The brake lever should not be sticky, and ensure the cable is in good condition. If the brake cable is not suitable, then you can replace the cable to prevent additional damage to other parts of the Bicycle. You need to check the brakes correctly. Adjust if needed, and change bra pads if necessary. Mandatory checks before the rainy season start. Keeping the pads and braking surface clean of dirt and oil. Dirty pads wear out themselves and the braking surface substantially faster.
Check with Gears
To adjust bike gears, turn your bike upside down and rest it on the seat and handlebars. Then, shift your bike to the gear you’re having problems with. If the chain won’t shift down when you lower your gears, turn the cable adjuster clockwise to loosen it.
How to adjust the gears
- Set the limit screws. With the gear cable disconnected, gently pedal forward until the chain drops onto the smallest sprocket.
- Tighten the cable.
- Turn the barrel adjuster on the derailleur clockwise until fully dialed in.
- Adjust the cable tension.
- Shift it up.
- B-tension screw.
Frame
First, inspect the frame for scratches. While checking the frame, you can clean it side by side if you have been riding in dirt, mud, or wet weather. If dirt gets into your gearing components, it can cause scratching and damage quickly. Clean the frame with a cloth, and the Bicycle can appear new.
Use of Lubricant:
Extend the life of the chain using chain lubricants. The use of lubricants can improve the life of the parts. Wet lube is best to use when riding in wet conditions. When the dirt sticks to it, make sure to clean the dirt using the cloth. Dry lube can be the best use of lubricant in a dry environment. Less dirt gets stuck to it, but if the rain comes, it can easily remove the dry lubricant. Over-lubricating can lead to poor performance and component damage. If you use excess lubricant, then it will attract dirt and other particles. Performance may decrease due to this. Excess lubricant should be carefully wiped.
These are a few points you can check on on how to service your bicycle at home. No one is born with comprehensive bicycle mechanic skills. You have to learn them by doing easy bicycle maintenance or, preferably, by being taught by someone with experience. Practice these skills often. If you have a tight schedule, get your Bicycle serviced at least once every two to three months to ensure its legibility. Ultimately, take care of your Bicycle, and it will take care of you.
Sanrocycles Bicycle on Rent Details:
If you want to Rent a bicycle, Sanrocycles provides bicycles in Pune and PCMC. Bicycle on Rent is also available in Wakad, Hinjewadi, Aundh, Kharadi, and many more places. Found yourself with a spare hour? Grab a Bicycle and explore. It is okay if you have a cycle; if not, do not worry. You can hire a Bicycle rental in Pune or Pimpri-Chinchwad areas and start cycling. You can also book a bicycle online and rent a bicycle. There is also an online bicycle store from which you can book a reasonably priced bicycle.
Why buy a new bike when you can rent one? Bicycles can also be provided for all types of bicycle events/rallies. Rent starts from 1200 Rs per Month for a geared bicycle. Cycles on Rent in Pune and Pimpri Chinchwad are available every Month. Accessories such as a helmet and wire lock can be provided with a bicycle. Hire the best bicycles in 2 simple steps:
