Most of the people love the bicycle that runs smoothly from the day it is purchased. Without any noise of brakes, smooth working gears, easy to pedal that is loved by everyone and enjoy the bicycle ride. Slow changing gears and brakes that don’t bring the bicycle to a quick stop, everyone recognizes the symptoms and needs attention after a long ride. How to service your bicycle at home with quick easy fix and ride your bicycle smoothly. Below are a few points which cover how to service your bicycle at home with quick and easy steps.
Below are the tools needed to do servicing or if you want to check the bicycle at home. These are the important tools needed for How to service your bicycle at home.
- Allen Keys
- Clean Clothes
- Chain lubricant
What to Check while servicing the bicycle
What should be checked if you want to do servicing of the bicycle at home? Below points cover the checklist you should see while servicing the bicycle. These are the important checklist for How to service your bicycle at home.
- Damage of components
- Tire Wear
- Damage nuts and Bolts
- Brake cable
- Brake pads
- Front and rear light are working
The period to service your bicycle
Regular servicing is a must to make assure that the bicycle is running smoothly and no damage to the components. It depends on distance, the more you ride the bicycle the more frequently you should service the bicycle. You should clean the bicycle if there is any dirt. Mostly in the rainy season, clean your bicycle frequently and check for chain lubricants as well. If the bicycle is not in use frequently still get it clean and use lubricant and at least check with the brakes.
Check Wheels while servicing the bicycle at home
Check with the spoke to ensure they are correctly tensioned and replace anywhere. It should spin freely without any side-to-side movement. Needless to say, check with the quick release are tight and in good working condition. Inspect with the bearing for any damage and clean by wiping down the dirt. Avoid degrease or spray them with any cleaners, as they are sealed unit and it will wash out any lubrication within the casing. Mostly this may be the job for the experienced one. You can check and if found any issues, you can visit nearby repair shops to check the damage.
Tighten all the screws, the important part to check the bicycle at home
Tighten all the screws which are on the Bicycle. Check if any nut bolts are damaged or need to tighten. Make sure to check all the important key bolts to check.
Brakes and cables
Brakes are the important part, ensure brakes are well maintained and also check with cables. You can lift the tire and spin the tire and check by applying the brakes. Should work perfectly. Check with the wear and tear for brake pads. The brake leaver should not be sticky and ensure the brake cable is in good condition. If the brake cable is not good then you can replace the cable to ensure additional damage to other parts of the bicycle. You need to check brakes correctly. Adjust if needed and change breaks pads if necessary. Mandatory checks before the rainy season start. It is also important to keep both the pads and the braking surface clean from dirt and oil. Dirty pads wear out themselves and the braking surface substantially faster.
Check with Gears
To adjust bike gears, start by turning your bike upside down and resting it on the seat and handlebars. Then, shift your bike to the gear that you’re having problems with. If the problem with your bike is that the chain won’t shift down when you lower your gears, turn the cable adjuster clockwise to loosen it.
How to adjust the gears
- Set the limit screws. With the gear cable disconnected, gently pedal forwards until the chain drops onto the smallest sprocket.
- Tighten the cable.
- Turn the barrel adjuster on the derailleur clockwise until it is almost fully dialed in.
- Adjust the cable tension.
- Shift it up.
- B-tension screw.
First, inspect the frame for any damage scratches. While inspecting the frame, you can clean the frame side by side if you have been riding in dirt, mud or wet weather. If dirt gets into your gearing components it can cause scratching and damage quickly. Clean with a cloth and the bicycle can appear like a new one.
Use of Lubricant:
Extend the life of the chain using chain lubricants. The use of lubricants can improve life for the parts. Wet lube is best to use when riding in the wet condition. When the dirt sticks to it, make sure to clean the dirt using the cloth. Dry lube can be the best use of lubricant in a dry environment. Less dirt gets stick to it but in case if the rain comes, it can easily remove the dry lubricant. Over-lubricating can lead to poor performance and component damage. If you use excess lubricant than it will attract dirt and other particles. Performance may decrease due to this. Excess lubricant should be carefully wiped.
These are a few points you can check how to service your bicycle at home. No one is born with comprehensive bicycle mechanic skills. That is something you have to learn by doing easy bicycle maintenance yourself, or more preferably by being taught by someone with experience. Practice these skills often. If you have a tight schedule get your bicycle servicing done minimum once in 2-3 months for the legibility of your bicycle. At the end take care of your bicycle and it will take care of you.
Bicycle renting starts only at 39/49/59 Rs daily if booked for a Month at Sanrocycles. Doorstep Pickup and drop available. You can hire a Bicycle Rent in Pune or Pimpri-Chinchwad and start riding the bicycle. You can also book a bicycle online and Rent a bicycle. Online bicycle store in Pune from which you can book a bicycle at a reasonable price.